BibTex RIS Cite

INVESTIGATION OF ELECTRICAL CHARACTERISTICS OF COMPOSITES PRODUCED BY ELECTROLESS Ni PLATING OF Si3N4

Year 2015, Volume: 28 Issue: 3, 419 - 424, 05.10.2015

Ahmet Yönetken

Abstract

The microstructure, dielectric properties and electrical characteristics of Ni plated Si3N4 powders were investigated using specimens produced by tube furnace sintering at 800-1200°C temperature. A uniform nickel layer on Si3N4 powders was deposited prior to sintering using electroless plating technique. A composite consisting of binary additions, a metallic phase, Ni within a matrix of Ni has been prepared under Ar shroud and then tube furnace sintered. XRD, SEM (Scanning Electron Microscope), Empedans Phase Analyzer were used to obtain structural data and to determine electrical properties such as dielectric and conductivity at the temperature range of 25-400C. The ferromagnetic resonance varied from 10 Hz to 1 GHz and measurements were employed to characterize the properties of the specimens. Experimental results carried out for composition (33Si3N4)66Ni at 1200°C suggest that the best properties as 75,81HB and permittivity were obtained at 1200°C

Keywords

Powder metallurgy electroless plating electrical proporties

References

  • G.O. Mallory, J.B. Hajdu, Electroless Plating: Fundamentals and Applications, AESF, Orlando, 1991.
  • Metzger, Th Florian, Trans. Inst. Met. Finish. 54 (1976) 174.
  • S.S. Tulsi, Finishing 7(11) (1983) 14.
  • J. Lukschandel, Trans. Inst. Met. Finish. 56(3) (1978) 118.
  • Poper P.. Ruddlesden S.N.. Trans. br. ceram. soc.. 60 (1961). 603.
  • Zıegler G.. Heınrıch J.. Wöttıng G.. J. Mater. Sci.. 22 (1987). 3041.
  • Guge E.. Woettıng G.. Ind. Cer.. 19 (1999). 196.
  • G.O. Mallory. J.B. Hajdu. Electroless Plating: Fundamentals Orlando.1991. AESF.
  • Metzger. Th Florian. Trans. Inst. Met. Finish. 54 (1976) 174.
  • J. Lukschandel. Trans. Inst. Met. Finish. 56(3) (1978) 118.
  • Z. Abdel Hamid. S.A. El Badry. A. Abdel Aal. Surf. Coat. Technol. 201(2007) 5948.
  • J. Novakovic. P. Vassiliou. Kl. Samara. Th. Argyropoulos Surf. Coat. Technol. 201(3-4) (2006)895.
  • M. Sarret. C. Muller. A. Amell. Surf. Coat. Tech. 201 (1-2) (2006) 389.
  • Int. J. Electrochem. Sci.. Vol. 2. 2007
  • I. Apachitei. F.D. Tichelaar. J. Duszczyk. L. Katgerman. Surf. Coat. Technol. 149 (2002) 263
  • Trojanová Z.. Lukáˇc P.. Ferkel H.and Riehemann W.. 2004. “Internal Friction in Microcrystalline and Nanocrystalline Mg”. Materials Science and Engineering A 370. P154-157.
  • Erol A.. Yönetken A.. ‘MW sintering ‘the economic way’ to ceramic reinforced nickel aluminide composites’ . Metal Powder Report. 2009 Vol 64. page 18-25

Year 2015, Volume: 28 Issue: 3, 419 - 424, 05.10.2015

Ahmet Yönetken

Abstract

References

  • G.O. Mallory, J.B. Hajdu, Electroless Plating: Fundamentals and Applications, AESF, Orlando, 1991.
  • Metzger, Th Florian, Trans. Inst. Met. Finish. 54 (1976) 174.
  • S.S. Tulsi, Finishing 7(11) (1983) 14.
  • J. Lukschandel, Trans. Inst. Met. Finish. 56(3) (1978) 118.
  • Poper P.. Ruddlesden S.N.. Trans. br. ceram. soc.. 60 (1961). 603.
  • Zıegler G.. Heınrıch J.. Wöttıng G.. J. Mater. Sci.. 22 (1987). 3041.
  • Guge E.. Woettıng G.. Ind. Cer.. 19 (1999). 196.
  • G.O. Mallory. J.B. Hajdu. Electroless Plating: Fundamentals Orlando.1991. AESF.
  • Metzger. Th Florian. Trans. Inst. Met. Finish. 54 (1976) 174.
  • J. Lukschandel. Trans. Inst. Met. Finish. 56(3) (1978) 118.
  • Z. Abdel Hamid. S.A. El Badry. A. Abdel Aal. Surf. Coat. Technol. 201(2007) 5948.
  • J. Novakovic. P. Vassiliou. Kl. Samara. Th. Argyropoulos Surf. Coat. Technol. 201(3-4) (2006)895.
  • M. Sarret. C. Muller. A. Amell. Surf. Coat. Tech. 201 (1-2) (2006) 389.
  • Int. J. Electrochem. Sci.. Vol. 2. 2007
  • I. Apachitei. F.D. Tichelaar. J. Duszczyk. L. Katgerman. Surf. Coat. Technol. 149 (2002) 263
  • Trojanová Z.. Lukáˇc P.. Ferkel H.and Riehemann W.. 2004. “Internal Friction in Microcrystalline and Nanocrystalline Mg”. Materials Science and Engineering A 370. P154-157.
  • Erol A.. Yönetken A.. ‘MW sintering ‘the economic way’ to ceramic reinforced nickel aluminide composites’ . Metal Powder Report. 2009 Vol 64. page 18-25
There are 17 citations in total.

Details

Primary Language English
Journal Section Mechanical Engineering
Authors

Ahmet Yönetken

Publication Date October 5, 2015
Published in Issue Year 2015 Volume: 28 Issue: 3

Cite

APA Yönetken, A. (2015). INVESTIGATION OF ELECTRICAL CHARACTERISTICS OF COMPOSITES PRODUCED BY ELECTROLESS Ni PLATING OF Si3N4. Gazi University Journal of Science, 28(3), 419-424.
AMA Yönetken A. INVESTIGATION OF ELECTRICAL CHARACTERISTICS OF COMPOSITES PRODUCED BY ELECTROLESS Ni PLATING OF Si3N4. Gazi University Journal of Science. October 2015;28(3):419-424.
Chicago Yönetken, Ahmet. “INVESTIGATION OF ELECTRICAL CHARACTERISTICS OF COMPOSITES PRODUCED BY ELECTROLESS Ni PLATING OF Si3N4”. Gazi University Journal of Science 28, no. 3 (October 2015): 419-24.
EndNote Yönetken A (October 1, 2015) INVESTIGATION OF ELECTRICAL CHARACTERISTICS OF COMPOSITES PRODUCED BY ELECTROLESS Ni PLATING OF Si3N4. Gazi University Journal of Science 28 3 419–424.
IEEE A. Yönetken, “INVESTIGATION OF ELECTRICAL CHARACTERISTICS OF COMPOSITES PRODUCED BY ELECTROLESS Ni PLATING OF Si3N4”, Gazi University Journal of Science, vol. 28, no. 3, pp. 419–424, 2015.
ISNAD Yönetken, Ahmet. “INVESTIGATION OF ELECTRICAL CHARACTERISTICS OF COMPOSITES PRODUCED BY ELECTROLESS Ni PLATING OF Si3N4”. Gazi University Journal of Science 28/3 (October 2015), 419-424.
JAMA Yönetken A. INVESTIGATION OF ELECTRICAL CHARACTERISTICS OF COMPOSITES PRODUCED BY ELECTROLESS Ni PLATING OF Si3N4. Gazi University Journal of Science. 2015;28:419–424.
MLA Yönetken, Ahmet. “INVESTIGATION OF ELECTRICAL CHARACTERISTICS OF COMPOSITES PRODUCED BY ELECTROLESS Ni PLATING OF Si3N4”. Gazi University Journal of Science, vol. 28, no. 3, 2015, pp. 419-24.
Vancouver Yönetken A. INVESTIGATION OF ELECTRICAL CHARACTERISTICS OF COMPOSITES PRODUCED BY ELECTROLESS Ni PLATING OF Si3N4. Gazi University Journal of Science. 2015;28(3):419-24.