Abstract
References
- REFERENCES [1] Savaşkan, M., Taptık, Y. ve Ürgen, M., 2004. Deney tasarımı yöntemi ile matkap uçlarında performans Optimizasyonu. İTÜ Dergisi/d Mühendislik, 3 (6), 117-128.
- [2] Montgomery, D., 2001. Design and Analysis of Experiments. 5. Baskı. New York: Wiley.
- [3] Yang W. H., Tarng Y. S., 1998. Design optimization of cutting parameters for turning operations based on the Taguchi method. Jounal of Materials Processing Technology, 84, 122-129.
- [4] Şirvancı, M., 1997. Kalite İçin Deney Tasarımı “Taguchi Yaklaşımı”. 1. Baskı. İstanbul: Literatür Yayıncılık.
- [5] Kalyan, A.R., 2004. Veri Yönetimi ve 6 Sigma, Sürekli İyileştirme İçin Veri Yönetimi ve 6 Sigma Sempozyumu. Erişim Tarihi: 04.03.2018. www.kalder.org/genel/Kaylan.pdf.
Abstract
Taguchi experimental design method is widely used in engineering field. Experiments are carried out in order to obtain the optimum values of the product designed or produced in the field of engineering. It is difficult to make the experiments because of the large number of parameters in the studies made. Therefore, with the Taguchi experimental design method, less experimentation can be done in shorter time and an accurate test strategy is being developed. Thus, saving is provided from time and cost, high quality and low cost production is achieved. In this study, information was given about Taguchi experimental design method and Taguchi applications in the field of textile.
Keywords
References
- REFERENCES [1] Savaşkan, M., Taptık, Y. ve Ürgen, M., 2004. Deney tasarımı yöntemi ile matkap uçlarında performans Optimizasyonu. İTÜ Dergisi/d Mühendislik, 3 (6), 117-128.
- [2] Montgomery, D., 2001. Design and Analysis of Experiments. 5. Baskı. New York: Wiley.
- [3] Yang W. H., Tarng Y. S., 1998. Design optimization of cutting parameters for turning operations based on the Taguchi method. Jounal of Materials Processing Technology, 84, 122-129.
- [4] Şirvancı, M., 1997. Kalite İçin Deney Tasarımı “Taguchi Yaklaşımı”. 1. Baskı. İstanbul: Literatür Yayıncılık.
- [5] Kalyan, A.R., 2004. Veri Yönetimi ve 6 Sigma, Sürekli İyileştirme İçin Veri Yönetimi ve 6 Sigma Sempozyumu. Erişim Tarihi: 04.03.2018. www.kalder.org/genel/Kaylan.pdf.
Details
| Primary Language | English |
|---|---|
| Subjects | Engineering |
| Journal Section | Review |
| Authors | |
| Early Pub Date | June 30, 2022 |
| Publication Date | June 30, 2022 |
| Acceptance Date | April 14, 2022 |
| Published in Issue | Year 2022 Volume: 4 Issue: 2 |
This work is licensed under a Creative Commons Attribution 4.0 International License