Experimental Research of Energy Consumption of Austenitizing Heat-Treated Casting Fittings in Pipe Threading

Burak Öztürk

doi:10.16984/saufenbilder.513294

Research Article

Year 2019, Volume: 23 Issue: 5, 869 - 878, 01.10.2019

Burak Öztürk

https://doi.org/10.16984/saufenbilder.513294

Cited By: 4

Abstract

References

[1] Weinert, K., Inasaki, I., Sutherland J. W., and Wakabayashi, T., “Dry Machining and Minimum Quantity Lubrication,” CIRP Ann., Vol. 53. No. 2, pp. 511–537, 2004.
[2] Düzdar, I., Kantoğlu, B. and Öztürk, B., “A New Product Design after Benchmarking Analysis of Helis Gear Pumps and Optimization in Energy Consumption,” Düzce Üniversitesi Bilim ve Teknoloji Dergisi, Vol. 6, pp. 610-617, 2017.
[3] Ingarao, G., Lorenzo D.R. and Micari, F., “Sustainability issues in sheet metal forming processes. An overview,” J. Clean. Prod., Vol. 19, No. 4, pp. 337-347, 2011.
[4] Balogun, V.A. and Mativenga, P.T., “Modelling of direct energy requirements in mechanical machining processes,” J. Clean. Prod., Vol. 41, pp. 179-186, 2013.
[5] Bhushan, R.K., “Optimization of cutting parameters for minimizing power consumption and maximizing tool life during machining of Al alloy SiC particle composites,” J. Clean. Prod., Vol. 39, pp. 242-254, 2013.
[6] Hanafi, I., Khamlichi, A., Cabrera, F.M., Almansa, E. and Jabbouri, A., “Optimization of cutting conditions for sustainable machining of PEEK-CF30 using TiN tools,” J. Clean. Prod., Vol. 33, pp. 1-9, 2012.
[7] Park, C.-W., Kwon, K.-S., Kim, W.-B., Min, B.-K., Park, S.-J., Sung, I.-H., Yoon, W.-S., Lee, K.-S., Lee, J.-H. and Seok, J., “Energy Consumption Reduction Technology in Manufacturing – A Selective Review of Policies, Standards, and Research,” Int. J. Precis. Eng. Man., Vol. 10, No. 5, pp. 151-173, 2009.
[8] Akkuş, H , Yaka, H . "Optimization of Turning Process By Using Taguchi Method". Sakarya University Journal of Science 22 (2018): 1444-1448 <http://www.saujs.sakarya.edu.tr/issue/31265/409502>
[9] Özsoy, N , Özsoy, M . "Optimization of Surface Roughness of AISI 1040 Stainless Steel in Milling Process Using Taguchi Method". Sakarya University Journal of Science 23 (2019): 113-120 <http://www.saujs.sakarya.edu.tr/issue/38708/466053>
[10] Mori, M., Fujishima, M., Inamasu, Y. and Oda, Y., “A study on energy efficiency improvement for machine tools,” CIRP Annals – Manuf. Technol., Vol. 60, pp. 145–148, 2011.
[11] Liu, N., Zhang, Y.F. and Lu, W.F., “A hybrid approach to energy consumption modelling based on cutting power: A milling case,” J. Clean. Prod., Vol. 104, pp. 264-272, 2015.
[12] Negrete, C.C., “Optimization of cutting parameters for minimizing energy consumption in turning of AISI 6061 T6 using Taguchi methodology and ANOVA,” J. Clean. Prod., Vol. 53, pp.195-203, 2013.
[13] Oda, Y., Mori, M., Ogawa, K., Nishida, S., Fujishima, M. and Kawamura, T., “Study of optimal cutting condition for energy efficiency improvement in ball end milling with tool-workpiece inclination,” CIRP Ann.- Manuf. Techn., Vol. 61, No. 1, pp. 119–122, 2012.
[14] Shokoohi, Y., Khosrojerdi, E. and Shiadhi, R., “Machining and ecological effects of a new developed cutting fluid in combination with different cooling techniques on turning operation,” J. Clean. Prod., Vol. 94, pp. 330-339, 2015.
[15] Neugebauer, R, Schubert, A., Reichmann, B. and Dix, M., “Influence exerted by tool properties on the energy efficiency during drilling and turning operations,” CIRP J. Manuf. Sci. Technol., Vol. 4, pp. 161–169, 2011.
[16] Escalona, P.M., Shokrani, A. and Newman, S.T., “Influence of cutting environments on surface integrity and power consumption of austenitic stainless steel,” Robot. Cim.-Int. Manuf., Vol. 36, pp. 60–69, 2015.
[17] Nas, E. and Öztürk, B., “Optimization of surface roughness via the Taguchi method and investigation of energy consumption when milling spheroidal graphite cast iron materials,” Mater. Test., Vol. 60, No. 5, pp. 519-524, 2018.
[18] Liu, N., Wang, S.B., Zhang, Y.F. and Lu, W.F., “A novel approach to predicting surface roughness based on specific cutting energy consumption when slot milling Al-7075,” Int. J. Mech. Sci., Vol. 118, pp. 13–20, 2016.
[19] Öztürk, B., Küçük Ö., Düzdar, İ. and Altınbilek, Y.S., “Exploring the economical reasons of the usage of unhealthy & low resisting Far-East products in the water pipe systems,” The Turkish Journal of Occupational/Environmental Medicine and Safety, Vol. 2, pp. 60-72, 2017.
[20] Öztürk, B., Öktem, H., Said, G., Çetindağ, H.A. and Erzincanlı, F., “Investigation of Cooling Rate on Hardness and Microstructure in Casting Fittings Materials,” in 4th International Symposium on Innovative Technologies in Engineering and Science, ISITES2016, 3-5 November, Alanya/Antalya, Turkey, pp. 1279-1285, 2016.
[21] Öktem, H., Öztürk, B. and Akincioğlu, S., “Investigation of energy consumption on thread machining of austempered ductile cast iron materials,” 5th International Conference and Exhibition on Mechanical & Aerospace Engineering, October 02-04, Las Vegas, USA, 2017. DOI: 10.4172/2168-9792-C1-01
[22] Korloy, “Korloy cutting tool technical specifications catalogue,” 2018.
[23] Fanuc, “Fanuc 1000 CNC user guide,” 2012.
[24] Entes, “Entes current transformer and ammeters technical specifications catalogue,” 2018.
[25] Shih, M.H., Sung, W.P. & Go, C.G., ‘’ A Design Concept With a DIsplacement Dependent Semi Active Hydraulic Damper Energy Dissipation’’ Exp Tech (2003) 27: 53. https://doi.org/10.1111/j.1747-1567.2003.tb00139.x
[26] Virgillito, E., Airale, A.G., Ferraris, A. et al., ‘’Specific Energy Absorption Evaluation on GFRP Laminate Plate by Optical, Thermographic and Tomographic Analysis’’, Exp Tech (2018). https://doi.org/10.1007/s40799-018-0257-y
[27] Simić, G., Lučanin, V., Tanasković, J. et al., ‘’ Experimental Research of Characteristics of Shock Absorbers of Impact Energy of Passenger Coaches‘’ Exp Tech (2009) 33

Experimental Research of Energy Consumption of Austenitizing Heat-Treated Casting Fittings in Pipe Threading

Year 2019, Volume: 23 Issue: 5, 869 - 878, 01.10.2019

Burak Öztürk

https://doi.org/10.16984/saufenbilder.513294

Cited By: 4

Abstract

Energy
consumption is an important part of the production cost of mass production
industrial enterprises. The casting, heat treatment and threading processes
involved in the industrial production of fittings result in high energy
consumption. In serial production, the threading of pipe fittings is carried
out using high torque and low speed. The thin-walled designs of the fittings
lead to rapid cooling, causing the formation of a high rate of pearlite
microstructures and subsequent low or extremely hard machinability. Heat
treatment with long austenitizing time in the furnace reduces the pearlite
ratio, thus enabling a ferritic microstructure to be obtained. In this study,
the ½-inch BSP threading process was applied to materials having both
microstructures after casting and heat treatment. As in the mass production
pipe threading process, fittings were threaded in a multi-threading process
using a universal lathe and in a single threading process using a CNC mill. The
Power Index (PI) was measured during the metal removal process and the energy
consumption of the products was calculated via energy/power conversion
equations. In addition, a new model was proposed that takes into consideration
the energy consumption per product (ECPP) in the mass production machining
process. As a result of combining the energy consumption and energy - power
transformation theory with an experimental investigation, 39% optimization was
achieved. That's a result of this experimental study resulted in energy savings
of 8755 kWh annually.

Keywords

Austenitizing, cast iron, energy consumption, fittings

References

[1] Weinert, K., Inasaki, I., Sutherland J. W., and Wakabayashi, T., “Dry Machining and Minimum Quantity Lubrication,” CIRP Ann., Vol. 53. No. 2, pp. 511–537, 2004.
[2] Düzdar, I., Kantoğlu, B. and Öztürk, B., “A New Product Design after Benchmarking Analysis of Helis Gear Pumps and Optimization in Energy Consumption,” Düzce Üniversitesi Bilim ve Teknoloji Dergisi, Vol. 6, pp. 610-617, 2017.
[3] Ingarao, G., Lorenzo D.R. and Micari, F., “Sustainability issues in sheet metal forming processes. An overview,” J. Clean. Prod., Vol. 19, No. 4, pp. 337-347, 2011.
[4] Balogun, V.A. and Mativenga, P.T., “Modelling of direct energy requirements in mechanical machining processes,” J. Clean. Prod., Vol. 41, pp. 179-186, 2013.
[5] Bhushan, R.K., “Optimization of cutting parameters for minimizing power consumption and maximizing tool life during machining of Al alloy SiC particle composites,” J. Clean. Prod., Vol. 39, pp. 242-254, 2013.
[6] Hanafi, I., Khamlichi, A., Cabrera, F.M., Almansa, E. and Jabbouri, A., “Optimization of cutting conditions for sustainable machining of PEEK-CF30 using TiN tools,” J. Clean. Prod., Vol. 33, pp. 1-9, 2012.
[7] Park, C.-W., Kwon, K.-S., Kim, W.-B., Min, B.-K., Park, S.-J., Sung, I.-H., Yoon, W.-S., Lee, K.-S., Lee, J.-H. and Seok, J., “Energy Consumption Reduction Technology in Manufacturing – A Selective Review of Policies, Standards, and Research,” Int. J. Precis. Eng. Man., Vol. 10, No. 5, pp. 151-173, 2009.
[8] Akkuş, H , Yaka, H . "Optimization of Turning Process By Using Taguchi Method". Sakarya University Journal of Science 22 (2018): 1444-1448 <http://www.saujs.sakarya.edu.tr/issue/31265/409502>
[9] Özsoy, N , Özsoy, M . "Optimization of Surface Roughness of AISI 1040 Stainless Steel in Milling Process Using Taguchi Method". Sakarya University Journal of Science 23 (2019): 113-120 <http://www.saujs.sakarya.edu.tr/issue/38708/466053>
[10] Mori, M., Fujishima, M., Inamasu, Y. and Oda, Y., “A study on energy efficiency improvement for machine tools,” CIRP Annals – Manuf. Technol., Vol. 60, pp. 145–148, 2011.
[11] Liu, N., Zhang, Y.F. and Lu, W.F., “A hybrid approach to energy consumption modelling based on cutting power: A milling case,” J. Clean. Prod., Vol. 104, pp. 264-272, 2015.
[12] Negrete, C.C., “Optimization of cutting parameters for minimizing energy consumption in turning of AISI 6061 T6 using Taguchi methodology and ANOVA,” J. Clean. Prod., Vol. 53, pp.195-203, 2013.
[13] Oda, Y., Mori, M., Ogawa, K., Nishida, S., Fujishima, M. and Kawamura, T., “Study of optimal cutting condition for energy efficiency improvement in ball end milling with tool-workpiece inclination,” CIRP Ann.- Manuf. Techn., Vol. 61, No. 1, pp. 119–122, 2012.
[14] Shokoohi, Y., Khosrojerdi, E. and Shiadhi, R., “Machining and ecological effects of a new developed cutting fluid in combination with different cooling techniques on turning operation,” J. Clean. Prod., Vol. 94, pp. 330-339, 2015.
[15] Neugebauer, R, Schubert, A., Reichmann, B. and Dix, M., “Influence exerted by tool properties on the energy efficiency during drilling and turning operations,” CIRP J. Manuf. Sci. Technol., Vol. 4, pp. 161–169, 2011.
[16] Escalona, P.M., Shokrani, A. and Newman, S.T., “Influence of cutting environments on surface integrity and power consumption of austenitic stainless steel,” Robot. Cim.-Int. Manuf., Vol. 36, pp. 60–69, 2015.
[17] Nas, E. and Öztürk, B., “Optimization of surface roughness via the Taguchi method and investigation of energy consumption when milling spheroidal graphite cast iron materials,” Mater. Test., Vol. 60, No. 5, pp. 519-524, 2018.
[18] Liu, N., Wang, S.B., Zhang, Y.F. and Lu, W.F., “A novel approach to predicting surface roughness based on specific cutting energy consumption when slot milling Al-7075,” Int. J. Mech. Sci., Vol. 118, pp. 13–20, 2016.
[19] Öztürk, B., Küçük Ö., Düzdar, İ. and Altınbilek, Y.S., “Exploring the economical reasons of the usage of unhealthy & low resisting Far-East products in the water pipe systems,” The Turkish Journal of Occupational/Environmental Medicine and Safety, Vol. 2, pp. 60-72, 2017.
[20] Öztürk, B., Öktem, H., Said, G., Çetindağ, H.A. and Erzincanlı, F., “Investigation of Cooling Rate on Hardness and Microstructure in Casting Fittings Materials,” in 4th International Symposium on Innovative Technologies in Engineering and Science, ISITES2016, 3-5 November, Alanya/Antalya, Turkey, pp. 1279-1285, 2016.
[21] Öktem, H., Öztürk, B. and Akincioğlu, S., “Investigation of energy consumption on thread machining of austempered ductile cast iron materials,” 5th International Conference and Exhibition on Mechanical & Aerospace Engineering, October 02-04, Las Vegas, USA, 2017. DOI: 10.4172/2168-9792-C1-01
[22] Korloy, “Korloy cutting tool technical specifications catalogue,” 2018.
[23] Fanuc, “Fanuc 1000 CNC user guide,” 2012.
[24] Entes, “Entes current transformer and ammeters technical specifications catalogue,” 2018.
[25] Shih, M.H., Sung, W.P. & Go, C.G., ‘’ A Design Concept With a DIsplacement Dependent Semi Active Hydraulic Damper Energy Dissipation’’ Exp Tech (2003) 27: 53. https://doi.org/10.1111/j.1747-1567.2003.tb00139.x
[26] Virgillito, E., Airale, A.G., Ferraris, A. et al., ‘’Specific Energy Absorption Evaluation on GFRP Laminate Plate by Optical, Thermographic and Tomographic Analysis’’, Exp Tech (2018). https://doi.org/10.1007/s40799-018-0257-y
[27] Simić, G., Lučanin, V., Tanasković, J. et al., ‘’ Experimental Research of Characteristics of Shock Absorbers of Impact Energy of Passenger Coaches‘’ Exp Tech (2009) 33

There are 27 citations in total.

Details

Primary Language	English
Subjects	Mechanical Engineering
Journal Section	Research Articles
Authors	Burak Öztürk 0000-0002-1018-6545
Publication Date	October 1, 2019
Submission Date	January 16, 2019
Acceptance Date	April 17, 2019
Published in Issue	Year 2019 Volume: 23 Issue: 5

Cite

APA	Öztürk, B. (2019). Experimental Research of Energy Consumption of Austenitizing Heat-Treated Casting Fittings in Pipe Threading. Sakarya University Journal of Science, 23(5), 869-878. https://doi.org/10.16984/saufenbilder.513294
AMA	Öztürk B. Experimental Research of Energy Consumption of Austenitizing Heat-Treated Casting Fittings in Pipe Threading. SAUJS. October 2019;23(5):869-878. doi:10.16984/saufenbilder.513294
Chicago	Öztürk, Burak. “Experimental Research of Energy Consumption of Austenitizing Heat-Treated Casting Fittings in Pipe Threading”. Sakarya University Journal of Science 23, no. 5 (October 2019): 869-78. https://doi.org/10.16984/saufenbilder.513294.
EndNote	Öztürk B (October 1, 2019) Experimental Research of Energy Consumption of Austenitizing Heat-Treated Casting Fittings in Pipe Threading. Sakarya University Journal of Science 23 5 869–878.
IEEE	B. Öztürk, “Experimental Research of Energy Consumption of Austenitizing Heat-Treated Casting Fittings in Pipe Threading”, SAUJS, vol. 23, no. 5, pp. 869–878, 2019, doi: 10.16984/saufenbilder.513294.
ISNAD	Öztürk, Burak. “Experimental Research of Energy Consumption of Austenitizing Heat-Treated Casting Fittings in Pipe Threading”. Sakarya University Journal of Science 23/5 (October 2019), 869-878. https://doi.org/10.16984/saufenbilder.513294.
JAMA	Öztürk B. Experimental Research of Energy Consumption of Austenitizing Heat-Treated Casting Fittings in Pipe Threading. SAUJS. 2019;23:869–878.
MLA	Öztürk, Burak. “Experimental Research of Energy Consumption of Austenitizing Heat-Treated Casting Fittings in Pipe Threading”. Sakarya University Journal of Science, vol. 23, no. 5, 2019, pp. 869-78, doi:10.16984/saufenbilder.513294.
Vancouver	Öztürk B. Experimental Research of Energy Consumption of Austenitizing Heat-Treated Casting Fittings in Pipe Threading. SAUJS. 2019;23(5):869-78.